Ptrans and Control is renowned Ultrasonic Radar level transmitter manufacturers in Pune, suppliers, dealers, traders in Pune. Our specialization is the Ultrasonic Radar Level Transmitters, which simplify and make level measurement effortless, safe, and by far accurate. These transmitters operate by measuring with sound wave technology, and therefore, do not need any physical contact with the material and can be adapted to liquids, solids and even the most difficult industrial conditions.
An Ultrasonic Radar Level Transmitter is a gadget that is utilized to determine the level of liquids or solids in a tank, silo or a container.
An ultrasonic level transmitter is utilized to measure the level with sound waves and time of flight principle. Ultrasonic Radar level Transmitter manufacturers in Pune simply emits a sound wave and waits until the echo is reflected and then computes the distance of the surface of the material. Here’s how it works:
Ultrasonic Signal Transmitter contains an ultrasonic transducer which generates a short high frequency sound wave (which is not audible to us human beings). This signal is inputted into the tank or vessel.
The wave sound passes through the air (or gas) over the material till it gets to the surface.
Once the wave reaches the surface of the liquid or solid it bounces back (similar to an echo in a tunnel).
The transducer is then used as a receiver and picks up the echo converting it into an electrical signal.
The gadget measures the duration between the time of pulse transmission and the time of receiving the echo. This is referred to as time of flight.
Using the formula:
Distance= Speed of Sound ×Travel Time/2
The system computes the distance of the surface of the material to the sensor. (The dividing by 2 is due to the fact that the sound moves down and then back up.)
After knowing the distance, the transmitter will then determine the real level of material in the tank by subtracting the distance with the overall height of the tank.
The output is then finally translated into a standard industrial signal (such as 420 mA or digital output) which may be read by the control systems, displays or monitors, or by monitoring programs.
As Ultrasonic Radar level Transmitter suppliers in Pune here are the advanced technical specifications.
| Category | Specification |
|---|---|
| Measuring Range | Up to 40 m (depending on model and media) |
| Accuracy | ±2 mm to ±3 mm |
| Repeatability | ±1 mm |
| Medium Temperature | -60°C to +120°C |
| Process Pressure | -0.1 to +0.3 MPa |
| Signal Output | 4–20 mA / HART, RS485, Bluetooth |
| Power Supply | 2-wire or 4-wire, depending on model |
| Enclosure Protection | IP67 (dust-tight, water-resistant) |
| Explosion-Proof | Ex ia IIC T6 Ga (for hazardous environments) |
| Process Connection | Threaded or flanged connections |
| Beam Angle | Narrow ultrasonic beam to reduce interference |
As Ultrasonic Radar level Transmitter dealers in Pune here are the benefits of level sensors.
Very tall tanks or deep vessels can have their levels measured by ultrasonic and radar transmitters. This renders them applicable to large-scale storage systems and industrial systems.
They can work well under dusty, foamy, vapor or condensation conditions. This guarantees that it reads correctly even in the abusive industrial conditions.
Most of the models have integrated sensors to compensate extreme temperatures or pressures. This ensures precision in the tough process conditions.
The ultrasonic and radar transmitters are able to give real-time information and instant readings. This enables decision-making and control of processes faster.
Explosion-proof or flameproof versions can be used in dangerous surroundings. Ultrasonic Level Transmitter is used to protect both personnel and equipment in chemical, oil or gas industries.
As Ultrasonic Radar level Transmitter traders in Pune here are the applications of radar level transmitters.
They check the quantities of tanks holding flammable or toxic waste. This is to provide safe handling and avoids accidental overflows.
Measured to determine the level of fuel, ballast and freshwater on ships. Radar Level Transmitters for Liquids & Solids are able to give precise readings in salty and turbulent environments of the sea.
Ultrasonic Radar level transmitter suppliers in Pune monitor the powders, grains and bulk solid levels in silos and hoppers. This enhances the inventory and avoids being overfilled.
In biofuels, biomass and hydroelectric plants, ultrasonic radar transmitters are used to check the water, slurry and chemical content. This is in favour of safe and efficient production of energy.
They are used to measure the water or the foam in the fire suppression tanks. This provides maintenance of constant readiness of tanks, and meeting safety standards.
Ptrans and Control is notorious Ultrasonic Radar level transmitter manufacturers in Pune, suppliers, dealers, traders in Pune. We do not just give transmitters, we give solutions that make your operations easier, safer and more efficient. We are at your side throughout the process and will provide the best experience with our expertise, trustworthy technology and support to guarantee the unwavering performance and trust. Get in touch with us.
Fill out the form below to start a conversation with us on WhatsApp.
Fill out the form below to start a conversation with us on WhatsApp.
