Pressure Transmitter

RTD Temperature Sensor

  • Simplex & Duplex sensor transmitters available
  • Available in all ranges
  • Accuracy class A, B
  • Flameproof head available

Thermocouple Temperature Sensor

  • Simplex & Duplex sensor transmitters available
  • Available in all ranges
  • Accuracy class A, B
  • J, K, R type available

Head Mounted Transmitter

  • Rail/Head Mounted transmitter
  • 2 wire system available
  • Output: 4-20 mA DC
  • Cold junction compensation for Thermocouple Input
  • Type of Input: RTD, Thermocouple, Resistance, Millivolt

PH sensor

  • Technical Parameters
  • Measuring range: 0–14
  • Zero point: 7.00 ± 0.25
  • Temperature range: 0–80°C
  • Temperature Sensor: –
  • Pressure range: 0–0.3 MPa
  • Reference system: Ag/AgCl/KCl
  • Membrane resistance: <500 MΩ
  • Connection thread: NPT 3/4"
  • Connection method: Standard configuration 10M
  • Installation method: Submerged type, pipeline type, flow

Chlorine Sensor

  • Measuring Material: Double platinum ring / 3 electrodes
  • Shell Material: Glass + POM
  • Waterproof Grade: IP68
  • Measuring Range: 0–2 mg/L | 0–10 mg/L | 0–20 mg/L
  • Measurement Accuracy: ±1% F.S.
  • Pressure Range: ≤0.3 MPa
  • Temperature Compensation: NTC10K
  • Temperature Range: 0–80°C
  • Calibration Methods:
    • Sample calibration
    • Chlorine-free water calibration
    • Comparison calibration
  • Connection Method: 4-core cable
  • Cable Length: Standard 10 m (optional up to 100 m)
  • Installation Thread: PG13.5
  • Scope of Application: Tap water, swimming pool water, etc.

❖ Turbidity Sensor

  • Power Outlet: 9~36 VDC / RS485 MODBUS RTU
  • Measurement Mode: 135° IR scattered light method
  • Dimensions: Diameter 50 mm × Length 223 mm
  • Housing Material: PVC + 316 Stainless Steel
  • Waterproof Rating: IP68
  • Measurement Range: 10–4000 NTU
  • Measurement Lower Limit: 20 NTU
  • Measurement Accuracy: < 5% of measured value
  • Pressure Resistance: 0.3 MPa
  • Measuring Temperature: 0–45°C
  • Calibration Methods:
    • Standard liquid calibration
    • Water sample calibration
  • Cable Length: Default 10 m, extendable up to 100 m
  • Thread: 1 inch tail thread
  • Application: General applications, rivers, lakes, environmental protection, etc.